E+E Elektronik India Private Limited

Humidity and Temperature Sensor for Building Automation
This sensor is designed for accurate and reliable measurement of relative humidity and temperature in building environments, helping to optimize indoor air quality, comfort, and energy efficiency. Engineered specifically for building automation systems, it offers precise data to HVAC controllers and building management systems (BMS) for effective climate control.

Product Details-

• Analogue or digital room temperature sensors for residential and commercial HVAC.
• The very stylish EE10-T enclosure is available in European and US size and in several colours. The snap-on concept allows for easy installation. The active part of the device can be replaced within seconds without any tools.
• The measured data is available either on the analogue output or on the Modbus RTU or the BACnet interface, as well as on the optional display.

EE660 is a high-precision sensor designed to measure low air velocities accurately and reliably, ideal for HVAC, cleanroom, and ventilation system applications. It provides continuous, stable measurement of low air flow speeds, helping to maintain optimal indoor air quality and energy-efficient air distribution.

The EE99-1 employs high-end E+E humidity sensing elements manufactured in state-of-the-art thin film technology, which are the prerequisite for outstanding measurement accuracy.

EE300Ex

The EE300Ex humidity and temperature sensor is dedicated for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), International (IECEx), USA / Canada (FM), China (NEPSI) and Korea (KCs) and can be employed in gas and dust explosion hazard areas. The intrinsically safe EE300Ex can be installed in the explosion hazard area even in zones 0 / 20 (Divison 1)

In environments where accuracy, reliability, and uptime matter most, E+E Elektronik’s newly launched 𝐇𝐓𝐒401 sets a new benchmark in humidity and temperature measurement.
With an accuracy of ±0.95 %𝗥𝗛 𝗮𝗻𝗱 ±0.1 °𝗖, and a wide operating range from –40 °𝗖 𝘁𝗼 +80 °𝗖, 𝘁𝗵𝗲 𝗛𝗧𝗦401 is engineered for dependable performance across outdoor installations, industrial applications, and cleanroom environments.

𝐖𝐡𝐚𝐭 𝐦𝐚𝐤𝐞𝐬 𝐭𝐡𝐞 𝐇𝐓𝐒401 𝐝𝐢𝐟𝐟𝐞𝐫𝐞𝐧𝐭?
🔹 rapidX measuring module - tool-free replacement in just 10 minutes
🔹 Fail-safe operation under condensation, chemicals, and temperature extremes
🔹 Automatic calibration with a digital inspection certificate for validated processes
🔹 Advanced protection with sensor coating, encapsulation, Automatic Recovery (ARC) and Condensation Guard (CG)
The result is precise process control, reduced maintenance effort, and measurable energy savings.

𝐓𝐲𝐩𝐢𝐜𝐚𝐥 𝐚𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬:
• High-end HVAC - data centers, swimming halls, outdoor systems
• Agriculture - greenhouses, storage & ripening facilities
• Pharmaceutical - cleanroom monitoring
• Food & beverage - meat and cheese maturation

Discover how the new 𝐇𝐓𝐒401 from E+E Elektronik India delivers reliable data when conditions are toughest.

EE471

The EE471 temperature sensor with remote probe reliably measures the temperature (T) in applications with space restrictions and is optimized for building automation, HVAC and process control.

EE310

The EE310 is optimised for best reliability in industrial applications from -80 °C (-112 °F) up to 180 °C (356 °F) and 20 bar (300 psi). In addition to highly accurate measurement of the relative humidity and temperature, the device calculates all other humidity related parameters. The EE310 employs high-end E+E humidity sensing elements manufactured in state-of-the-art thin film technology, which enable the outstanding measurement accuracy. 

Product Details-

• The EE211 is dedicated for accurate and long term stable measurement under continuous high humidity (>85 % RH) and condensing conditions in demanding climate control.
• It features a heated humidity probe and an interchangeable temperature probe. Excellent performance of EE211 even in polluted, aggressive environment is ensured by the combination of completely encapsulated measurement electronics inside the humidity probe and the long-term stable HCT01 sensor with E+E proprietary coating.
• The EE211 enclosure is rated IP65/NEMA 4, minimizes installation costs and provides outstanding protection against pollution and condensation. All measured and calculated values are available on the Modbus RTU interface whereas two of the values are available on the analogue voltage or current (3-wire) output. Additionally up to three values can be shown simultaneously on the optional illuminated display.
• With the optional USB configuration adapter the user can set the Modbus RTU interface parameters, the display format, the measured parameters and the output scaling. Furthermore, the user can perform an one or two point humidity and temperature adjustment. The T probe can also be adjusted separate, whereby the reference can be a high accuracy dry block calibrator.

Applications:

• Fruit and vegetable storage
• Cooling, ripening and environmental chambers
• Green houses, incubators and mushroom industry

Temperature and humidity sensor (or rh temp sensor) is devices that can convert temperature and humidity into electrical signals that can easily measure temperature and humidity.

Temperature and Humidity Sensor

A Temperature and Humidity Sensor is a device designed to simultaneously measure ambient temperature and relative humidity. These sensors are widely used in HVAC systems, environmental monitoring, industrial processes, and building automation to ensure optimal climate control and comfort.

Equipped with precise sensing elements, these sensors provide accurate, real-time data with fast response times and stable long-term performance.

EE220

The EE220 humidity and temperature transmitter with pluggable, interchangeable probes is optimised for clean room, food and pharamaceutical industry.

E+E Elektronik EE10 – Humidity and Temperature Room Sensor

The EE10 is a compact and reliable sensor designed for precise measurement of relative humidity and temperature in indoor environments. It is ideal for room climate monitoring and control in HVAC and building automation systems, providing accurate data to optimize comfort and energy efficiency.

Featuring a user-friendly design and stable sensor technology, the EE10 ensures long-term performance with minimal maintenance. Its versatile output options and easy installation make it a preferred choice for residential, commercial, and industrial buildings.

Product Details-

• The  UL  listed  EE310  is  optimized  for  best  reliability  in  industrial  applicationsup  to  180  °C  (356  °F)  and  20  bar  (290  psi).  In  addition  to  highly  accurate  measurement  of  the  relative  humidity  (RH)  and  temperature  (T),  the  device  calculates all other humidity related parameters.
• Measurement Performance The EE310 employs high-end E+E humidity sensing elements manufactured in state-of-the-art thin film technology, which are the prerequisite for outstanding measurement accuracy. Long-Term StabilityThe E+E proprietary coating protects the sensing elements against corrosive and  electrically  conductive  pollution,  which  leads  to  outstanding  long-term  stability even in harsh environment. With the appropriate choice of filter cap, the EE310 tackles even challenging industrial applications.VersatilityThe  EE310  is  available  for  wall  or  duct  mount  as  well  as  with  remote  probe.  It  features  an  UL  Type  4  polycarbonate  enclosure  which  facilitates  installation    and    maintenance.    The    enclosure    can    accommodate    a    100...240 V AC supply unit or various interface modules.OutputsThe  measured  data  is  available  on  two  analogue  outputs  and  on  the  RS485  interface with Modbus RTU protocol.Configurable and AdjustableThe  configuration  and  the  RH  and  T  adjustment  of  the  EE310  can  be  performed  using  the  free  EE-PCS  Product Configuration Software via the USB interface.

Protective sensor coating (option C1):

• The E+E proprietary sensor coating is a protective layer applied to the sensing elements, their leads and soldering points. The coating substantially extends sensor lifetime and ensures optimal measurement performance in corrosive environment (salts, off-shore applications). Additionally, it improves the sensors’ long term stability in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface or on the electrical connections.

In environments where accuracy, reliability, and uptime matter most, E+E Elektronik’s newly launched 𝐇𝐓𝐒401 sets a new benchmark in humidity and temperature measurement.
With an accuracy of ±0.95 %𝗥𝗛 𝗮𝗻𝗱 ±0.1 °𝗖, and a wide operating range from –40 °𝗖 𝘁𝗼 +80 °𝗖, 𝘁𝗵𝗲 𝗛𝗧𝗦401 is engineered for dependable performance across outdoor installations, industrial applications, and cleanroom environments.

Product Details-

• The EE150 humidity and temperature transmitter has been optimised specifically for use in the HVAC and building automation and impresses with an outstanding price/performance ratio.
• he clever housing concept, the compact design and the Ø 6mm probe simplify istallation, which results in minimised installation costs.

• The IP65/NEMA 4 enclosure provides optimal protection of the electronics, while the capacitive E+E humidity sensor element stands for long-term stable measurement results.

Typical Application:

• Heating, ventilation and air conditioning
• Building automation systems

Product Details-

• The EE220 humidity and temperature transmitter with pluggable, interchangeable probes is optimised for clean room, food and pharamaceutical industry.
• The EE220 basis unit can accommodate one combined EE07 RH and T probe or two separate EE07 probes, one for RH and one for T. The probes can be plugged onto the basis unit either directly, or with M12 extension cables up to 10m (32.8ft) long. A loop calibration or adjustment in the field, as required by the FDA (Food and Drugs Administration) regulated industries is easily possible for the EE220 with two separate probes.
• The EE220 basis unit is available with polycarbonate or with metal enclosure, appropriate for suitable for wall mount or for installation on rails (DIN EN 50022). An optional kit facilitates the mounting of the probe in a duct.
• For surface moisture monitoring or for the early detection of condensation danger, EE220 can accommodate the EE03 RH & T module (see data sheet EE03).
• The E+E proprietary coating protects the humidity sensors against corrosion and dirt, which leads to best long term stability even in harsh environment.

Typical Applications:

• Pharma, biotech
• Incubators and clean rooms
• Cool chambers
• Storage rooms

HTS201 is a reliable and easy-to-install sensor designed for precise measurement of relative humidity and temperature in indoor environments. Ideal for building automation, HVAC systems, and environmental monitoring, it helps maintain optimal indoor air quality, comfort, and energy efficiency.

The E+E Pressure Transmitter is a compact, high-performance sensor designed to measure relative or absolute pressure in gases, liquids, or air systems. Known for its reliability and precision, it is widely used in HVAC systems, industrial process control, and cleanroom monitoring.

E+E Elektronik EE046 Condensation Monitor is an effective solution designed to prevent condensation in critical cold spots. This Condensation Monitor comes in two variants to cater to different installation needs. The wall/pipe mount type is suitable for flat surfaces and pipes with a maximum diameter of 50 mm (2″), primarily used in applications such as cooling and heating through concrete core activation.

Applications: HVAC, Cold Storage Facilities, Greenhouses, Building Construction, Environmental Monitoring, Food and Beverage Industry etc.

The E+E Pressure Transmitter is a compact, high-performance sensor designed to measure relative or absolute pressure in gases, liquids, or air systems. Known for its reliability and precision, it is widely used in HVAC systems, industrial process control, and cleanroom monitoring.

Intrinsically Safe Humidity and Temperature Sensor

An Intrinsically Safe Humidity and Temperature Sensor is specifically engineered for safe operation in hazardous environments where explosive gases, vapors, or dust may be present. This sensor measures relative humidity and temperature while meeting stringent safety standards to prevent ignition risks.

Built with explosion-proof design principles and certified for use in hazardous areas (such as ATEX, IECEx, or NEC/CEC), the sensor ensures reliable and accurate environmental monitoring in industries like oil & gas, chemical processing, mining, and pharmaceuticals.

CO₂ sensors by E+E Elektronik rely on the long-term stability of the NDIR* dual wavelength principle (*non-dispersive infrared technology) with auto-calibration. The sensors support precise measurement of the CO₂ concentration up to 10,000 ppm.

Humidity & Temperature Sensor
A Humidity & Temperature Sensor is an essential device designed to accurately measure both relative humidity and temperature simultaneously. This sensor plays a crucial role in maintaining optimal environmental conditions across various applications, including HVAC systems, industrial processes, and building automation.
Built with reliable sensor technology, it offers stable, precise readings, enabling effective monitoring and control of climate parameters to enhance comfort, safety, and process efficiency.

Humidity and Temperature Transmitter
A Humidity and Temperature Transmitter is a precise instrument designed to measure and transmit relative humidity and temperature data in real time for process control, environmental monitoring, and building automation applications. These transmitters convert sensor signals into standardized analog or digital outputs for seamless integration into control systems.
Equipped with high-accuracy sensors and robust electronics, humidity and temperature transmitters provide reliable, long-term stable measurements, ensuring optimal climate control and process efficiency.

HTS201 is a reliable and easy-to-install sensor designed for precise measurement of relative humidity and temperature in indoor environments. Ideal for building automation, HVAC systems, and environmental monitoring, it helps maintain optimal indoor air quality, comfort, and energy efficiency.

HTS801 – Humidity and Temperature Sensor for High Humidity and Chemically Polluted Conditions
The HTS801 sensor from E+E Elektronik is engineered to deliver accurate and reliable measurement of relative humidity and temperature in extremely challenging environments characterized by high humidity levels and the presence of chemically aggressive pollutants. This rugged sensor is specially designed for applications where standard sensors would fail due to corrosion or contamination.

HTS201 is a reliable and easy-to-install sensor designed for precise measurement of relative humidity and temperature in indoor environments. Ideal for building automation, HVAC systems, and environmental monitoring, it helps maintain optimal indoor air quality, comfort, and energy efficiency.

E+E Elektronik EE471 Temperature Sensor with Remote Probe is designed for measuring temperature in specific applications where the sensor needs to be placed at a distance from the point of measurement. This Temperature Sensor with Remote Probe feature allows for flexibility in positioning the sensor in environments where direct contact may not be feasible or safe. This Temperature Sensor typically have a specified level of good accuracy.

Applications : Building automation, HVAC systems, Environmental Monitoring , process control , Laboratories, etc.

CO₂ sensors by E+E Elektronik rely on the long-term stability of the NDIR* dual wavelength principle (*non-dispersive infrared technology) with auto-calibration. The sensors support precise measurement of the CO₂ concentration up to 10,000 ppm.

HTS201 is a reliable and easy-to-install sensor designed for precise measurement of relative humidity and temperature in indoor environments. Ideal for building automation, HVAC systems, and environmental monitoring, it helps maintain optimal indoor air quality, comfort, and energy efficiency.

HTS201 is a reliable and easy-to-install sensor designed for precise measurement of relative humidity and temperature in indoor environments. Ideal for building automation, HVAC systems, and environmental monitoring, it helps maintain optimal indoor air quality, comfort, and energy efficiency.

E+E Elektronik EE431 Duct and Immersion Temperature Sensor are ideal for process control, HVAC, and building automation. This Temperature Sensor measures temperature (T) in liquids and air with high accuracy. Digital, Analog, and Passive Outputs: This Temperature Sensor can be identified and used by the Modbus RTU, BACnet MS/TP protocol, RS485 interface, voltage or current output, or other methods.

Applications: Building Automation, Refrigeration, Environmental Monitoring, Data Centers, Clean Rooms and Laboratories, HVAC (Heating, Ventilation, and Air Conditioning System), and Process Control Systems.

EE040 is a compact, reliable, and precise sensor designed for simultaneous measurement of relative humidity and temperature. It offers excellent accuracy and long-term stability in a small form factor, making it ideal for applications where space is limited but accurate environmental monitoring is essential.

HTP501

The digital humidity and temperature probe HTP501 is designed for use in drying chambers and other demanding industrial applications. The stainless steel probe offers excellent measurement accuracy and can be deployed in temperatures ranging from -40 to 120 °C (-40 to 248 °F). The measured values are available on the RS485 interface with Modbus RTU protocol.

EE08

The EE08 reliably measures the relative humidity (RH) and the temperature (T) in indoor and outdoor applications. Outstanding temperature compensation leads to excellent accuracy over the wide working range of 0...100 %RH and -40...+80 °C (-40...176 °F).

EE074

The EE074 is dedicated for accurate temperature (T) measurement of air, gases and liquids. The robust stainless steel probe is ideal for climate and process control in the food and pharmaceutical industries, in clean rooms or in agriculture. It offers a high accuracy of ±0.1 °C and a wide temperature range up to -70...105 °C (-94... 221 °F). The measured data is available via the RS485 interface with Modbus RTU protocol.

The EE210 sensor which is available for wall or duct mounting, with remote probe as well as an outdoor version, is designed for highly accurate measurement of humidity and temperature in demanding climate control applications. The EE210 incorporates a state of the art E+E humidity and temperature sensing element. For use in special applications do not hesitate to contact E+E Elektronik or a local distributor. 

Humidity / Temperature Probe with Voltage Output
This probe is designed for accurate and simultaneous measurement of relative humidity and temperature, featuring a straightforward voltage output for easy integration with control and monitoring systems. It provides reliable environmental data for HVAC, industrial, and building automation applications.
Built for durability and stable long-term performance, the probe offers quick response times and consistent readings. The voltage output simplifies connectivity to data loggers, controllers, or PLCs without complex signal conditioning.

HTS201 is a reliable and easy-to-install sensor designed for precise measurement of relative humidity and temperature in indoor environments. Ideal for building automation, HVAC systems, and environmental monitoring, it helps maintain optimal indoor air quality, comfort, and energy efficiency.