E+E Elektronik India Private Limited

Thermal flow meters from E+E Elektronik measure the mass flow or standard volumetric flow of compressed air and non-corrosive gases. They are suitable for pipelines of DN15 to DN700 and enable reliable leak detection. E+E flow sensors therefore play a significant role in reducing costs.

 

 

Why E+E Flow Sensors / Flow Meters?

• They are user-friendly

E+E flow meters are easy to install thanks to their installation and service-friendly design. The sensor unit can be removed and installed for maintenance or calibration in just a few seconds.

• They provide reliable measuring results

At the heart of the E+E flow meters is a flow sensing element developed by E+E, based on the hot-film anemometer measurement principle. It has high resistance to contamination and provides long-term stable and accurate measuring results.

• They offer a high level of accuracy

The factory calibration for E+E flow meters is carried out in the typical pressure range for a compressed air network at 7 bar, which ensures a high level of measuring accuracy.

• Measurement is independent of pressure or temperature

The thermal measuring principle enables mass flow and volumetric flow measurement independently of pressure or temperature. This means that the flow sensors can be used in a wide range of pressures and temperatures.

The EE741 in-line flow meter can be easily adapted for any measuring task. It is dedicated for accurate metering and monitoring of compressed air and technical gases in DN 15 to DN50 pipes.

Inquire nowTo the downloads

The thermal measuring principle and the well proven E+E hot film sensor element lead to best long-term stability and fast response time.

Outstanding measuring accuracy, even in the lower measuring range, is achieved by an application-specific multi-point factory adjustment performed at 7 bar (102 psi). This allows reliable leak detection and corresponding energy savings. The construction of the EE741 flow meter is optimised for easy installation and maintenance.

Modular design

One and the same transmitter can be used for each of three pipe diameters:

• EE741: DN15 (1/2") / DN20 (3/4") / DN25 (1")
• EE741-N50: DN32 (1-1/4") / DN40 (1-1/2") / DN50 (2")

The pipe diameter is easily set via the display menu or the EE-PCS product configuration software.

Once the gauge mounting block is installed in the pipeline, the transmitter can be installed and removed without any pipework. As a result, the EE741 flow meter is also ideal for temporary measurement at several installed mounting blocks. The sealing plug included in the scope of supply enable the normal operation of the compressed air system when the transmitter is removed.

Display (optional)

The state-of-the-art LCD shows the current measured values and the overall consumption. The EE741 setup can be easily performed with the push buttons and intuitive menu guidance. The display can be rotated in 90° increments with a push button for convenient orientation in any mounting position of the flow meter.

Typical Applications

• Compressed air consumption measurement
• Monitoring of technical gases O2, N2, Ar, CO₂. Other gases upon request
• Nitrogen generators
• Leak detection

We are always available to answer any questions you may have!

The flow sensor can measure the consumption of compressed air, nitrogen, oxygen, CO₂, argon or other non-corrosive gases. The measurement ball valve permits easy installation and removal with only a short interruption of the flow.

EE771 flow sensor employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

The EE776 is a thermal mass flow meter dedicated for monitoring compressed air, nitrogen, CO₂ or other non-corrosive and non-flammable gases. It can be employed in pipes from DN50 to DN700 (2" to 28") and at up to 16 bar (232 psi).

The EE771 is a thermal flow sensor for compressed air and gases. Irrespective of pressure and temperature, the EE771 flow meter registers mass flow, volumetric flow or standard flow.

The flow sensor can measure the consumption of compressed air, nitrogen, oxygen, CO₂, argon or other non-corrosive gases. The measurement ball valve permits easy installation and removal with only a short interruption of the flow.

EE771 flow sensor employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It records accurately even the smallest flow which represent an essential prerequisite for calculating consumption costs or for finding leaks.

Every E+E flow sensor undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi), the corresponding calibration certificate is included in the standard scope of supply.

The EE771 flow sensor is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.

The EE772 is a multifunctional flow sensor  compressed air and gases. Irrespective of pressure and temperature, the EE772 flow sensor registers mass flow, volumetric flow or standard flow.

The flow sensor can be used effectively to measure the consumption of compressed air, nitrogen, CO₂ or other non-corrosive gases.

The gauge mounting block allows for the installation and removal without flow interruption. Regular calibration, without taking into account the device downtime, is therefore always an option. Besides the mass flow probe, the gauge mounting block with hot tap valve can accomodate also a dew point and a pressure sensor.

EE772 flow sensor employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It records accurately even the smallest flow which represent an essential prerequisite for calculating consumption costs or for finding leaks.

Every E+E flow sensor undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi), the corresponding calibration certificate is included in the standard scope of supply. The EE772 flow sensor is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.

Display Flow Meter is an advanced instrument designed to measure and visually display the flow rate of liquids or gases in pipelines or open channels. Combining precise flow measurement technology with an integrated digital or analog display, it provides real-time, easy-to-read flow data directly at the measurement site.

The flow sensor can be used effectively to measure the consumption of compressed air, nitrogen, CO₂ or other non-corrosive gases.

The gauge mounting block allows for the installation and removal without flow interruption. Regular calibration, without taking into account the device downtime, is therefore always an option. Besides the mass flow probe, the gauge mounting block with hot tap valve can accomodate also a dew point and a pressure sensor.

EE772 flow sensor employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It records accurately even the smallest flow which represent an essential prerequisite for calculating consumption costs or for finding leaks.

Every E+E flow sensor undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi), the corresponding calibration certificate is included in the standard scope of supply. The EE772 flow sensor is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.

The EE776 flow meter set new standards in terms of safety and easy assembly. The patented non-return protection combines three functions in one device: 

Non-return protection
The probe can only be moved in one direction during installation, and it cannot return at all, even if it is released.

Seal
By means of an encapsulated O-ring, the pressurized gaz cannot leak during probe mounting.

Probe positioning
The precise positioning with respect to immersion depth and orientation is easy to perform, guaranteeing accurate measurement results.

An optional ½" ball valve enables the installation and removal of the probe without interruption of the gas flow. Every EE776 flow meter undergoes a precise factory calibration procedure at a pressure of 9 bar (130 psi), the corresponding calibration certificate is included in the standard scope of supply.

EE776 features two outputs which can be configured as analogue (current or voltage), alarm or pulse output for consumption metering. The EE776 flow meter is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.

HUMOR20-M1 is a state-of-the-art humidity calibrator designed for highly accurate and reliable calibration of humidity sensors and transmitters. Engineered for laboratories, quality control, and field service, this device ensures precise generation and control of humidity conditions for testing and calibration purposes.

The flow sensor can be used effectively to measure the consumption of compressed air, nitrogen, CO₂ or other non-corrosive gases.

The gauge mounting block allows for the installation and removal without flow interruption. Regular calibration, without taking into account the device downtime, is therefore always an option. Besides the mass flow probe, the gauge mounting block with hot tap valve can accomodate also a dew point and a pressure sensor.

EE772 flow sensor employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It records accurately even the smallest flow which represent an essential prerequisite for calculating consumption costs or for finding leaks.

Every E+E flow sensor undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi), the corresponding calibration certificate is included in the standard scope of supply. The EE772 flow sensor is available with an additional MODBUS RTU or M-BUS (Meter-Bus) interface.

FlexFlow PF20S is a robust and versatile flow sensor specifically engineered for accurate and reliable measurement of liquid flow in demanding industrial environments. Designed with durability and precision in mind, this sensor delivers consistent performance for a wide range of industrial processes, including water treatment, chemical dosing, HVAC systems, and process automation.

Digital Flow Meter is a precise instrument used to measure the flow rate of liquids or gases and provide an accurate digital readout of the measured value. Designed for integration into industrial and process control systems, it offers high reliability, ease of use, and flexible communication options