E+E Elektronik India Private Limited

An integrated auto-calibration procedure leads to accuracy of ±2 °C (±3.6 °F) Td. The measured values for dew point, frost point or ppm volume concentration are available on an analog 4-20 mA and a digital Modbus RTU output. Integration into the measurement task is simplified by the compact design and the exceptionally robust stainless steel enclosure.

With an optional Modbus to USB convertor and the free EE-PCS configuration software the user can adjust the dew point transmitter, set the Modbus parameters, and change the scaling of the analogue output.

The compact EE355 dew point sensor with a measuring range down to -60 °C (-76 °F) Td and outstanding price/performance ratio is dedicated for applications in compressed air systems, plastic dryers and industrial drying processes.

The compact EE355 dew point sensor with a measuring range down to -60 °C (-76 °F) Td and outstanding price/performance ratio is dedicated for applications in compressed air systems, plastic dryers and industrial drying processes.

The EE354 dew point meter is optimised for monitoring refrigeration dryers. The measurement accuracy of ±1 °C (±1.8 °F) over the range of -3...20 °C Td (26.6...68 °F Td) and excellent long-term stability of the dew point sensor make the EE354 the ideal meter for refrigeration dryers.

Due to its compact design, EE354 can be easily installed even in tight, confined spaces. The extremely rugged stainless steel enclosure with ½ ISO or NPT thread and the M12x1 electrical connection facilitate quick and easy integration into the measuring task.

Typical applications

• Compressed air networks
• Refrigeration dryer monitoring

EE371 is dedicated for accurate and reliable monitoring of the dew point temperature (Td) in the range -60...60 °C Td (-76...140 °F Td), with pressure rating up to 100 bar (1 450 psi). It is ideal for compressed air systems and industrial process control. Besides Td, the device measures also frost point temperature (Tf) or volume concentration (Wv).

A Handheld Dew Point Meter is a portable instrument used to measure the dew point temperature of gases such as compressed air, nitrogen, or natural gas. It helps monitor moisture levels in critical applications where dry air or gas quality is essential, such as in industrial gas systems, HVAC, and pharmaceutical processes.

The Omniport 40 is characterised by a wide range of measurement options, maximum convenience and high efficiency. The Omniport 40 is particularly suitable for applications in the areas of maintenance, process monitoring or servicing. Coupled with an integrated oil database, extensive data logging functions and user-friendly and flexible operation, the Omniport 40 is the ideal companion for demanding applications in the field or during maintenance work.

Versatile, efficient and convenient – save up to 50% of your time with the new Omniport 40.

• Save up to 50% of your time with parallel measurement.
• Precise analysis and minimised effort due to predefined measuring points.
• Reduce maintenance costs: reliable oil quality monitoring using an integrated oil library.

he EE354 dew point meter is optimised for monitoring refrigeration dryers. The measurement accuracy of ±1 °C (±1.8 °F) over the range of -3...20 °C Td (26.6...68 °F Td) and excellent long-term stability of the dew point sensor make the EE354 the ideal meter for refrigeration dryers.

Due to its compact design, EE354 can be easily installed even in tight, confined spaces. The extremely rugged stainless steel enclosure with ½ ISO or NPT thread and the M12x1 electrical connection facilitate quick and easy integration into the measuring task.

Reliable Condensation Warning
Condensation on a surface occurs when the relative humidity (RH) of the air close to the surface reaches 100 %. The EE046 condensation monitor measures accurately the relative humidity of the air at the surface temperature. An early warning is given via the relay output when this reaches a value of 90 % RH, just before condensation occurs. The relay also indicates a power supply failure or a broken cable. Additionally, an LED indicates the operating status of the EE046 (normal operation / alarm / power supply failure).

Mounting on Surfaces and Pipes 
The EE046 condensation monitor is available in two versions. The wall/pipe mount model is appropriate for installation on flat surfaces and on pipes with a diameter of up to 50 mm (2"). It is mounted on cooling ceilings, on cooling or cold water piping, cooled surfaces and chilled beams.

Snap-On Model for Pipes with 16 mm (0.63") Diameter 
The snap-on model can be mounted on plastic and aluminium composite pipes with 16 mm (0.63") diameter. Typical applications for this model are cooling and heating by concrete core activation.

Fast Response Time, Long-Term Stable Measurement 
Because of the very good thermal coupling with the surface, the EE046 responds very quickly to humidity or surface temperature changes.

The high-quality humidity sensing element is protected against dust and dirt by the E+E proprietary coating. This ensures long-term stable and reliable measurements in harsh and polluted environments.

Typical Applications

• Concrete core activation
• Chilled beams
• Switching cabinets
• Climate control

A Portable Dew Point Meter is a compact and handheld device used to measure the dew point temperature of gases or air in various industrial and environmental applications. The dew point indicates the temperature at which moisture in the air begins to condense, helping assess humidity levels and dryness of gases like compressed air, nitrogen, or natural gas.

• The EE046 warns early and reliably of a condensation risk. It thus helps to prevent dripping or mould at critical cold spots. The condensation monitor can be mounted on flat surfaces and on pipes.
• Reliable Condensation Warning
• Condensation on a surface occurs when the relative humidity (RH) of the air close to the surface reaches 100 %. The EE046 condensation monitor measures accurately the relative humidity of the air at the surface temperature. An early warning is given via the relay output when this reaches a value of 90 % RH, just before condensation occurs. The relay also indicates a power supply failure or a broken cable. Additionally, an LED indicates the operating status of the EE046 (normal operation / alarm / power supply failure).
• Mounting on Surfaces and Pipes
• The EE046 condensation monitor is available in two versions. The wall/pipe mount model is appropriate for installation on flat surfaces and on pipes with a diameter of up to 50 mm (2"). It is mounted on cooling ceilings, on cooling or cold water piping, cooled surfaces and chilled beams.
• Snap-On Model for Pipes with 16 mm (0.63") Diameter
• The snap-on model can be mounted on plastic and aluminium composite pipes with 16 mm (0.63") diameter. Typical applications for this model are cooling and heating by concrete core activation.
• Fast Response Time, Long-Term Stable Measurement
• Because of the very good thermal coupling with the surface, the EE046 responds very quickly to humidity or surface temperature changes.
• The high-quality humidity sensing element is protected against dust and dirt by the E+E proprietary coating. This ensures long-term stable and reliable measurements in harsh and polluted environments.

• Concrete core activation
• Chilled beams
• Switching cabinets
• Climate control

• Fast response time
• Compact design and easy mounting
• Dust protection
• LED status indication

With the Omniport 40, E+E Elektronik is launching the new generation of its tried-and-tested hand-held measuring device. The device is characterized by a wide range of measurement options, maximum convenience and high efficiency. The Omniport 40 is particularly suitable for applications in the areas of maintenance, process monitoring or servicing. Coupled with an integrated oil database, extensive data logging functions and user-friendly and flexible operation, the Omniport 40 is the ideal companion for demanding applications in the field or during maintenance work.

Versatile, efficient and convenient – save up to 50% of your time with the new Omniport 40.

• Save up to 50% of your time with parallel measurement.
• Precise analysis and minimised effort due to predefined measuring points.
• Reduce maintenance costs: reliable oil quality monitoring using an integrated oil library.

An integrated auto-calibration procedure leads to accuracy of ±2 °C (±3.6 °F) Td. The measured values for dew point, frost point or ppm volume concentration are available on an analog 4-20 mA and a digital Modbus RTU output. Integration into the measurement task is simplified by the compact design and the exceptionally robust stainless steel enclosure.

With an optional Modbus to USB convertor and the free EE-PCS configuration software the user can adjust the dew point transmitter, set the Modbus parameters, and change the scaling of the analogue output.

E+E Compact Dew Point Temperature Transmitter is designed to monitor for accurate and reliable monitoring of the dew point temperature (Td) with a pressure rating of up to 100 bar. Besides Td, the device also measures frost point temperature (Tf) or volume concentration.

Applications: HVAC systems, Industrial Drying Processes, Compressed Air Systems, Climate Monitoring in Greenhouses, Meteorology and Weather Stations, Cold Storage and Refrigeration, Clean Rooms and Laboratories